Counter Flow Gesloten Lus Mini Vierkante Vloeibare Koeltoren

FOB Referentie prijs:Krijg recentste prijs
US$ 4.720,00 - US$ 54.280,00 / Set | 1 Set/sets (Min. Order)
Ondersteuning Zeevracht
rapport Verdachte Activiteit
Snelle gegevens
koeling soort:
Counter Flow
Vermogen( w):
1.3 kw
Afmetingen( l* w* h):
2200*1000*1830 MM
Superdyma & koper tupe
plaats van herkomst:
Jiangsu, China
naam van het merk:
380 V ~ 480 V
CE; ISO9001: 2008
Cooling Capaciteit:
25000 kcal/h
5 ton
Fan Power:
0.55 kw
Spray pomp:
0.75 kw
8400 m3/h
Warmtewisselaar Materiaal:
koper tupe
behuizing Materiaal:
Mg-Al-Zn Legering Gecoat Staal
Filler Materiaal:
18 Maanden
After- sales service:
ingenieurs om service machines in het buitenland
30 Set/Sets per Month
Verpakking en verzending
standaard verpakking zorgt juiste bescherming tijdens transport
Levertijd: :
typically 3~4weeks

GTM Series Counter Flow Closed Water Cooling Tower

GTM Series have been developed since 2011, with capacities ranging from 5 to 250 tons/ unit/ hour. This series is finished with alloy (Mg-Al-Zn) coated steel, or stainless steel enclosure, stainless steel or copper heat exchange coils. Besides, this series can be integrated with circulating pumps and valves on options. 
As counter flow towers, the cool air is inlet through both sides of the tower from the bottom, then drawn upwards through the whole heat exchange coils, against the spraying water in the opposite direction, eventually outlet with heat. 
GTM Towers tend to be more compact, taking less installation space. And it’s without PVC filling stuff, more suitable to cool hot water of higher temperature. This series are also widely applied in different fields, to provide circulating cooling water or other liquid for HAVC system, air compressors, melting shops, heating machines, chemical plants, and food industries etc.

Product Description

Counter Flow Closed Loop Mini Square Liquid Cooling Tower


Note: All the data is under the condition of 28℃ wet temperature.

If any change of condition,the data will change.



Model no.

GTM-1(closed circuit)

Water flow rate

5m³/h, adjustable as different temperature

Cooling capacity

From 65~55to45~35

Water pressure


Pipe diameter

Input diameter(mm)


Output diameter(mm)


Rated Power

Fan (KW)


Spray pump(KW)


Material of shell/tower body

Superdyma(imported from Japan)

Material of tupe

SUS304;Red copper

Installation Method

Modular Design,Easy Install


Closed water cooling tower shell is made in Mg-Al-Zn alloy coated steel, of "SuperDyma" series from company Nippon Steel, originally imported Japan. This special alloy coated steel is much better than galvanized steel in corrosion proof performance.


The primary use of cooling towers is to remove the heat absorbed in the circulating cooling water system used in power plants, petroleum refineries, petrochemical plants, natural gas processing plants, food processing plants, semi-conductor plants Etc… So Same Cooled Water Can Be Used Again… Which Saves Precious water …The smallest cooling towers are designed to handle water streams of only a few Liters of water per minute supplied in small pipes like those might see in a residence, while the largest cool hundreds of thousands of Liters per minute supplied in pipes as much as 15 feet (about 5 meters) in diameter on a large power plant.
A Cooling Tower is a heat exchange system that removes waste heat from a process system fluid, usually water.Cooling towers are used in both commercial and industrial applications.
Company Information



Packaging & Shipping


Our Services


-Quick response in 12 hours

-Professional and economical cooling solution for every client

-Considerate and complete after sales service





Below information are normally required to know for selection of a most proper tower model and solution:


Application:  (Explanations: Where the cooling towers will be used for? e.g. for HAVC system, Air Compressors, Melting Furnaces, etc.)
* Water Flow Rate: /h(Explanations: How many Tons of water required per hour?)
* Inlet Water Temp.: °C(Explanations: Temperature of hot water to be cooled)(also descriped as "water temperature drop")
* Outlet Water Temp.: °C(Explanations: Temperature of cooled water, usually it shall be at least 3~4 °C higher than the wet-bulb temp.) 
* Wet-bulb Temp.: °C(Explanations: Highest wet bulb temp. of the location/area or city to install the tower is essential to know to evaluate the size of towers)
* Power Supply:  (Explanations: 380V/3 Phases is standard, which we could have in stock, but for customized towers, the delivery time could be longer)


For easier discussions, 24 hours on line service available: Angela is online: skype: oasanjiu Mob./WhatsApp: 13559666650


Many thanks for your interests, and your inquires are always well attended!


u Mag
Niet precies wat u zoekt? Eén aanvraag, meerdere offertes Nu offertes ontvangen >>
u Mag
De resultaten van deze producten of leveranciers zijn automatisch voor u vertaald door onze vertaaltool. Als u problemen ondervindt met de vertaalresultaten, zijn uw suggesties van harte welkom.
Alle informatie over producten en leveranciers op deze pagina die wordt weergegeven in een taal anders dan Engels is informatie van die automatisch is vertaald door de vertaaltool. Als u een vraag over of suggestie hebt voor de kwaliteit van de automatische vertaling, mailt u ons via De vertaling is een volledig automatisch proces dat wordt voltooid door techniek. heeft niet deelgenomen in de vertaling en kent en beheert de vertaling of de inhoud van vermeldingen niet. en zijn dochterondernemingen wijzen bij dezen uitdrukkelijk elke garantie, expliciet of impliciet, en verantwoordelijk af voor verlies die voortkomt uit of in vertrouwen op automatisch vertaalde informatie, of die wordt veroorzaakt door een technische fout in de vertaaltool.